dmesg - 4 x Intel Xeon E5645 - bochsdrmfb - Xen HVM domU
Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.144-3.1 (2019-02-19)
Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=/dev/xvda7 ro quiet
x86/fpu: Legacy x87 FPU detected.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f7fffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.11.1-7.5.1.xcpng8 08/30/2019
Hypervisor detected: Xen
Xen version 4.11.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 00F0000000 mask FFF0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
found SMP MP-table at [mem 0x000fb630-0x000fb63f] mapped at [ffff9e1b800fb630]
Base memory trampoline at [ffff9e1b80098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x30935000, 0x30935fff] PGTABLE
BRK [0x30936000, 0x30936fff] PGTABLE
BRK [0x30937000, 0x30937fff] PGTABLE
BRK [0x30938000, 0x30938fff] PGTABLE
BRK [0x30939000, 0x30939fff] PGTABLE
RAMDISK: [mem 0x35d53000-0x36ea0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen )
ACPI: XSDT 0x00000000FC00D920 000044 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 0x00000000FC00D2D0 0000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 0x00000000FC0042A0 008FAC (v02 Xen HVM 00000000 INTL 20160527)
ACPI: FACS 0x00000000FC004260 000040
ACPI: FACS 0x00000000FC004260 000040
ACPI: APIC 0x00000000FC00D3D0 000460 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 0x00000000FC00D8B0 000038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET 0x00000000FC00D8F0 000028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007f7fffff]
NODE_DATA(0) allocated [mem 0x7f7fb000-0x7f7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007f7fffff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000007f7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007f7fffff]
On node 0 totalpages: 522141
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8096 pages used for memmap
DMA32 zone: 518144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 128 CPUs, 120 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x7f800000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:128 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff9e1bfae00000 s105304 r8192 d29864 u262144
pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152
pcpu-alloc: [0] 000 001 002 003 004 005 006 007
pcpu-alloc: [0] 008 009 010 011 012 013 014 015
pcpu-alloc: [0] 016 017 018 019 020 021 022 023
pcpu-alloc: [0] 024 025 026 027 028 029 030 031
pcpu-alloc: [0] 032 033 034 035 036 037 038 039
pcpu-alloc: [0] 040 041 042 043 044 045 046 047
pcpu-alloc: [0] 048 049 050 051 052 053 054 055
pcpu-alloc: [0] 056 057 058 059 060 061 062 063
pcpu-alloc: [0] 064 065 066 067 068 069 070 071
pcpu-alloc: [0] 072 073 074 075 076 077 078 079
pcpu-alloc: [0] 080 081 082 083 084 085 086 087
pcpu-alloc: [0] 088 089 090 091 092 093 094 095
pcpu-alloc: [0] 096 097 098 099 100 101 102 103
pcpu-alloc: [0] 104 105 106 107 108 109 110 111
pcpu-alloc: [0] 112 113 114 115 116 117 118 119
pcpu-alloc: [0] 120 121 122 123 124 125 126 127
xen: PV spinlocks enabled
PV qspinlock hash table entries: 512 (order: 1, 8192 bytes)
Built 1 zonelists in Node order, mobility grouping on. Total pages: 513960
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=/dev/xvda7 ro quiet
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 520192 bytes
log_buf_len min size: 131072 bytes
log_buf_len: 1048576 bytes
early log buf free: 123028(93%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2003336K/2088564K available (6268K kernel code, 1161K rwdata, 2872K rodata, 1424K init, 656K bss, 85228K reserved, 0K cma-reserved)
Kernel/User page tables isolation: enabled
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=128.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=128
NR_IRQS:33024 nr_irqs:1856 16
xen:events: Using FIFO-based ABI
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.037 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.00 BogoMIPS (lpj=9576008)
pid_max: default: 131072 minimum: 1024
ACPI: Core revision 20160831
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Spectre V2 : Enabling Restricted Speculation for firmware calls
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 24K
ftrace: allocating 25295 entries in 99 pages
smpboot: Max logical packages: 32
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
smpboot: CPU0: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz (family: 0x6, model: 0x2c, stepping: 0x2)
cpu 0 spinlock event irq 53
Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
NMI watchdog: Shutting down hard lockup detector on all cpus
installing Xen timer for CPU 1
x86: Booting SMP configuration:
.... node #0, CPUs: #1
cpu 1 spinlock event irq 59
installing Xen timer for CPU 2
#2
cpu 2 spinlock event irq 65
installing Xen timer for CPU 3
#3
cpu 3 spinlock event irq 71
installing Xen timer for CPU 4
#4
cpu 4 spinlock event irq 77
installing Xen timer for CPU 5
#5
cpu 5 spinlock event irq 83
installing Xen timer for CPU 6
#6
cpu 6 spinlock event irq 89
installing Xen timer for CPU 7
#7
cpu 7 spinlock event irq 95
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (38370.17 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 32768 (order: 9, 2097152 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
random: fast init done
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
xen: --> pirq=16 -> irq=9 (gsi=9)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc220-0xc22f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io 0xc200-0xc21f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf17fffff pref]
pci 0000:00:03.0: [5853:0001] type 00 class 0x010000
pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: reg 0x14: [mem 0xf0000000-0xf0ffffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
ACPI: Enabled 2 GPEs in block 00 to 0F
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
clocksource: Switched to clocksource xen
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x08a0-0x08a3] has been reserved
system 00:01: [io 0x0cc0-0x0ccf] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=17 -> irq=8 (gsi=8)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=18 -> irq=12 (gsi=12)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=19 -> irq=1 (gsi=1)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=20 -> irq=6 (gsi=6)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=21 -> irq=4 (gsi=4)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
xen: --> pirq=22 -> irq=7 (gsi=7)
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:08: [io 0xae00-0xae0f] has been reserved
system 00:08: [io 0xb044-0xb047] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
xen: --> pirq=23 -> irq=23 (gsi=23)
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17720K
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1575324912.589:1): initialized
workingset: timestamp_bits=40 max_order=19 bucket_order=0
zbud: loaded
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 44
GHES: HEST is not enabled!
xen: --> pirq=24 -> irq=28 (gsi=28)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
zswap: loaded using pool lzo/zbud
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
xenbus_probe_frontend: Device with no driver: device/vbd/768
xenbus_probe_frontend: Device with no driver: device/vbd/5696
xenbus_probe_frontend: Device with no driver: device/vif/0
rtc_cmos 00:02: setting system clock to 2019-12-02 22:15:12 UTC (1575324912)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1424K
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1908K
Freeing unused kernel memory: 1224K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
piix4_smbus 0000:00:01.3: SMBus Host Controller not enabled!
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xen_netfront: Initialising Xen virtual ethernet driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ata_piix 0000:00:01.1: version 2.13
uhci_hcd: USB Universal Host Controller Interface driver
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.0-8-amd64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SSE version of gcm_enc/dec engaged.
vbd vbd-5696: 19 xenbus_dev_probe on device/vbd/5696
FDC 0 is a S82078B
blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
xvda: xvda1 xvda2 < xvda5 xvda6 xvda7 >
ata2.01: ATAPI: QEMU DVD-ROM, 0.10, max UDMA/100
ata2.01: configured for MWDMA2
scsi 1:0:1:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
sr 1:0:1:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
usb 1-2: new full-speed USB device number 2 using uhci_hcd
PM: Starting manual resume from disk
PM: Hibernation image partition 202:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
usb 1-2: New USB device found, idVendor=0627, idProduct=0001
usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-2: Product: QEMU USB Tablet
usb 1-2: Manufacturer: QEMU 0.10.2
usb 1-2: SerialNumber: 1
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/0003:0627:0001.0001/input/input3
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
tsc: Refined TSC clocksource calibration: 2394.003 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821679ea2, max_idle_ns: 440795326917 ns
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
EXT4-fs (xvda7): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization xen.
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Debug File System...
EXT4-fs (xvda7): re-mounted. Opts: errors=remount-ro
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
ACPI: Sleep Button [SLPF]
input: PC Speaker as /devices/platform/pcspkr/input/input6
sr 1:0:1:0: Attached scsi generic sg0 type 5
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[drm] Initialized
ppdev: user-space parallel port driver
[drm] Found bochs VGA, ID 0xb0c4.
[drm] Framebuffer size 8192 kB @ 0xf1000000, ioports @ 0x1ce.
[TTM] Zone kernel: Available graphics memory: 1012822 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: bochsdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device
[drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
Adding 975868k swap on /dev/xvda5. Priority:-1 extents:1 across:975868k SSFS
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (xvda6): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[246]: Received request to flush runtime journal from PID 1
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done.
PM: freeze of devices complete after 4.001 msecs
suspending xenstore...
PM: late freeze of devices complete after 0.326 msecs
PM: noirq freeze of devices complete after 25.235 msecs
xen:events: Xen HVM callback vector for event delivery is enabled
Xen Platform PCI: I/O protocol version 1
xen:grant_table: Grant tables using version 1 layout
xen: --> irq=9, pirq=16
xen: --> irq=8, pirq=17
xen: --> irq=12, pirq=18
xen: --> irq=1, pirq=19
xen: --> irq=6, pirq=20
xen: --> irq=4, pirq=21
xen: --> irq=7, pirq=22
xen: --> irq=23, pirq=23
xen: --> irq=28, pirq=24
Suspended for 3.407 seconds
PM: noirq restore of devices complete after 22.799 msecs
PM: early restore of devices complete after 0.283 msecs
usb usb1: root hub lost power or was reset
rtc_cmos 00:02: System wakeup disabled by ACPI
ata2.01: configured for MWDMA2
usb 1-2: reset full-speed USB device number 2 using uhci_hcd
PM: restore of devices complete after 580.870 msecs
Restarting tasks ... done.
Setting capacity to 31457280
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done.
PM: freeze of devices complete after 4.422 msecs
suspending xenstore...
PM: late freeze of devices complete after 0.267 msecs
PM: noirq freeze of devices complete after 29.465 msecs
xen:events: Xen HVM callback vector for event delivery is enabled
Xen Platform PCI: I/O protocol version 1
xen:grant_table: Grant tables using version 1 layout
xen: --> irq=9, pirq=16
xen: --> irq=8, pirq=17
xen: --> irq=12, pirq=18
xen: --> irq=1, pirq=19
xen: --> irq=6, pirq=20
xen: --> irq=4, pirq=21
xen: --> irq=7, pirq=22
xen: --> irq=23, pirq=23
xen: --> irq=28, pirq=24
Suspended for 1.892 seconds
PM: noirq restore of devices complete after 17.803 msecs
PM: early restore of devices complete after 0.252 msecs
usb usb1: root hub lost power or was reset
rtc_cmos 00:02: System wakeup disabled by ACPI
ata2.01: configured for MWDMA2
usb 1-2: reset full-speed USB device number 2 using uhci_hcd
PM: restore of devices complete after 576.887 msecs
Restarting tasks ... done.
Setting capacity to 31457280
blk_update_request: I/O error, dev xvda, sector 3834472
blk_update_request: I/O error, dev xvda, sector 3834384
blk_update_request: I/O error, dev xvda, sector 3834296
blk_update_request: I/O error, dev xvda, sector 3834120
blk_update_request: I/O error, dev xvda, sector 3834208
blk_update_request: I/O error, dev xvda, sector 3834032
blk_update_request: I/O error, dev xvda, sector 3833944
blk_update_request: I/O error, dev xvda, sector 3835264
blk_update_request: I/O error, dev xvda, sector 3835352
blk_update_request: I/O error, dev xvda, sector 3835176
EXT4-fs warning (device xvda1): ext4_end_bio:314: I/O error -5 writing to inode 2841 (offset 209715200 size 8388608 starting block 479488)
Buffer I/O error on device xvda1, logical block 478976
Buffer I/O error on device xvda1, logical block 478977
Buffer I/O error on device xvda1, logical block 478978
Buffer I/O error on device xvda1, logical block 478979
Buffer I/O error on device xvda1, logical block 478980
Buffer I/O error on device xvda1, logical block 478981
Buffer I/O error on device xvda1, logical block 478982
Buffer I/O error on device xvda1, logical block 478983
Buffer I/O error on device xvda1, logical block 478984
Buffer I/O error on device xvda1, logical block 478985
EXT4-fs warning (device xvda1): ext4_end_bio:314: I/O error -5 writing to inode 2841 (offset 218103808 size 3149824 starting block 479744)
JBD2: Detected IO errors while flushing file data on xvda1-8
JBD2: Detected IO errors while flushing file data on xvda1-8